Streamable HTTP transport

In the Streamable HTTP transport, the server operates as an independent process that can handle multiple client connections. This transport uses HTTP POST and GET requests. Server can optionally make use of Server-Sent Events (SSE) to stream multiple server messages. This permits basic MCP servers, as well as more feature-rich servers supporting streaming and server-to-client notifications and requests.

The server MUST provide a single HTTP endpoint path (hereafter referred to as the MCP endpoint) that supports both POST and GET methods. For example, this could be a URL like https://mcpindotnet.github.io/mcp.

Let’s break down how this transport works in detail:

sequenceDiagram
    participant Client
    participant Server

    note over Client, Server: initialization

    Client->>+Server: POST InitializeRequest
    Server->>-Client: InitializeResponse<br>Mcp-Session-Id: 1868a90c...

    Client->>+Server: POST InitializedNotification<br>Mcp-Session-Id: 1868a90c...
    Server->>-Client: 202 Accepted

    note over Client, Server: client requests
    Client->>+Server: POST ... request ...<br>Mcp-Session-Id: 1868a90c...

    alt single HTTP response
      Server->>Client: ... response ...
    else server opens SSE stream
      loop while connection remains open
          Server-)Client: ... SSE messages from server ...
      end
      Server-)Client: SSE event: ... response ...
    end
    deactivate Server

    note over Client, Server: client notifications/responses
    Client->>+Server: POST ... notification/response ...<br>Mcp-Session-Id: 1868a90c...
    Server->>-Client: 202 Accepted

    note over Client, Server: server requests
    Client->>+Server: GET<br>Mcp-Session-Id: 1868a90c...
    loop while connection remains open
        Server-)Client: ... SSE messages from server ...
    end
    deactivate Server

Sending Messages to the Server link

Every JSON-RPC message sent from the client MUST be a new HTTP POST request to the MCP endpoint.

1. The client MUST use HTTP POST to send JSON-RPC messages to the MCP endpoint.
2. The client MUST include an Accept header, listing both application/json and text/event-stream as supported content types.
3. The body of the POST request MUST be a single JSON-RPC request, notification, or response.
4. If the input is a JSON-RPC response or notification:
   • If the server accepts the input, the server MUST return HTTP status code 202 Accepted with no body.
   • If the server cannot accept the input, it MUST return an HTTP error status code (e.g., 400 Bad Request). The HTTP response body MAY comprise a JSON-RPC error response that has no id.
5. If the input is a JSON-RPC request, the server MUST either return Content-Type: text/event-stream, to initiate an SSE stream, or Content-Type: application/json, to return one JSON object. The client MUST support both these cases.
6. If the server initiates an SSE stream:
   • The SSE stream SHOULD eventually include JSON-RPC response for the JSON-RPC request sent in the POST body.
   • The server MAY send JSON-RPC requests and notifications before sending the JSON-RPC response. These messages SHOULD relate to the originating client request.
   • The server SHOULD NOT close the SSE stream before sending the JSON-RPC response for the received JSON-RPC request, unless the session expires.
   • After the JSON-RPC response has been sent, the server SHOULD close the SSE stream.
   • Disconnection MAY occur at any time (e.g., due to network conditions). Therefore:
     • Disconnection SHOULD NOT be interpreted as the client cancelling its request.
     • To cancel, the client SHOULD explicitly send an MCP CancelledNotification.
     • To avoid message loss due to disconnection, the server MAY make the stream resumable.

Listening for Messages from the Server link

1. The client MAY issue an HTTP GET to the MCP endpoint. This can be used to open an SSE stream, allowing the server to communicate to the client, without the client first sending data via HTTP POST.
2. The client MUST include an Accept header, listing text/event-stream as a supported content type.
3. The server MUST either return Content-Type: text/event-stream in response to this HTTP GET, or else return HTTP 405 Method Not Allowed, indicating that the server does not offer an SSE stream at this endpoint.
4. If the server initiates an SSE stream:
   • The server MAY send JSON-RPC requests and notifications on the stream.
   • These messages SHOULD be unrelated to any concurrently-running JSON-RPC request from the client.
   • The server MUST NOT send a JSON-RPC response on the stream unless resuming a stream associated with a previous client request.
   • The server MAY close the SSE stream at any time.
   • The client MAY close the SSE stream at any time.

Multiple Connections link

1. The client MAY remain connected to multiple SSE streams simultaneously.
2. The server MUST send each of its JSON-RPC messages on only one of the connected streams; that is, it MUST NOT broadcast the same message across multiple streams.
   • The risk of message loss MAY be mitigated by making the stream resumable.

Resumability and Redelivery link

To support resuming broken connections, and redelivering messages that might otherwise be lost:

1. Servers MAY attach an id field to their SSE events, as described in the SSE standard
   • If present, the ID MUST be globally unique across all streams within that session—or all streams with that specific client, if session management is not in use.
2. If the client wishes to resume after a broken connection, it SHOULD issue an HTTP GET to the MCP endpoint, and include the Last-Event-ID header to indicate the last event ID it received.
   • The server MAY use this header to replay messages that would have been sent after the last event ID, on the stream that was disconnected, and to resume the stream from that point.
   • The server MUST NOT replay messages that would have been delivered on a different stream.

In other words, these event IDs should be assigned by servers on a per-stream basis, to act as a cursor within that particular stream.

Session Management link

An MCP “session” consists of logically related interactions between a client and a server, beginning with the initialization phase. To support servers which want to establish stateful sessions:

1. A server using the Streamable HTTP transport MAY assign a session ID at initialization time, by including it in an Mcp-Session-Id header on the HTTP response containing the InitializeResult.
   • The session ID SHOULD be globally unique and cryptographically secure (e.g., a securely generated UUID, a JWT, or a cryptographic hash).
   • The session ID MUST only contain visible ASCII characters (ranging from 0x21 to 0x7E).
2. If an Mcp-Session-Id is returned by the server during initialization, clients using the Streamable HTTP transport MUST include it in the Mcp-Session-Id header on all of their subsequent HTTP requests.
   • Servers that require a session ID SHOULD respond to requests without an Mcp-Session-Id header (other than initialization) with HTTP 400 Bad Request.
3. The server MAY terminate the session at any time, after which it MUST respond to requests containing that session ID with HTTP 404 Not Found.
4. When a client receives HTTP 404 in response to a request containing an Mcp-Session-Id, it MUST start a new session by sending a new InitializeRequest without a session ID attached.
5. Clients that no longer need a particular session (e.g., because the user is leaving the client application) SHOULD send an HTTP DELETE to the MCP endpoint with the Mcp-Session-Id header, to explicitly terminate the session.
   • The server MAY respond to this request with HTTP 405 Method Not Allowed, indicating that the server does not allow clients to terminate sessions.

Protocol Version Header link

If using HTTP, the client MUST include the MCP-Protocol-Version: <protocol-version> HTTP header on all subsequent requests to the MCP server, allowing the MCP server to respond based on the MCP protocol version.

For example: MCP-Protocol-Version: 2025-06-18

The protocol version sent by the client SHOULD be the one negotiated during initialization.

For backwards compatibility, if the server does not receive an MCP-Protocol-Version header, and has no other way to identify the version - for example, by relying on the protocol version negotiated during initialization - the server SHOULD assume protocol version 2025-03-26.

If the server receives a request with an invalid or unsupported MCP-Protocol-Version, it MUST respond with 400 Bad Request.